Log in

View Full Version : Hawaiian 69 Camaro LS6/T56- Progress pics

Teetoe_Jones
12-20-2007, 12:23 PM
Aloha- We are getting the final plumbing and parts buttoned up on this 69 Camaro for a gentlemen in the Hawaii Islands. We installed our Chicane-LM front suspension, DSE mini tubs with Global West L2 CAT5 leaf springs, DSE subframe connectors, Vintage Air compac II, LS6 from a 2002 Corvette Z06 converted to a carb, and backed by a viper internal T56 six speed.

The car has 18" Budnik Laterals on it, and C5 front and rear brakes. Here are some quick pics we took last night. We can get pics of anything else, just ask for them, and well post them.

http://i9.tinypic.com/6nte3v5.jpg

http://i18.tinypic.com/80l61ck.jpg

Tyler
ccracin
12-20-2007, 12:57 PM
Tyler,

Who's Rad. is that? Looks great! Happy Holidays.
Teetoe_Jones
12-20-2007, 01:08 PM
The radiator is from one of our dealers, a guy named Ron Davis. We custom made the aluminum hardline connections from 180 degree U bends from Burns Stainless.

Tyler
scholtmj
12-20-2007, 02:14 PM
where did those pulleys come from? They look sweet! :thumbsup:
awr68
12-20-2007, 03:58 PM
Looking good T!!! :thumbsup:
almcbri
12-20-2007, 04:04 PM
where did those pulleys come from? They look sweet! :thumbsup:

Here is the link for the LSx accessory drive.
http://store.nexternal.com/shared/StoreFront/default.asp?CS=ats&StoreType=BtoC&Count1=144863307&Count2=62003731
XcYZ
12-20-2007, 04:28 PM
Lookin good, Tyler. :thumbsup:

Do you have any side shots that show the Lateral wheels?
Teetoe_Jones
12-20-2007, 04:44 PM
where did those pulleys come from? They look sweet! :thumbsup:

We manufacture the entire accessory drive system. We call it the Sidewinder.

Here is a shot of the wheels for those that haven't seen them on a car before:

http://i16.tinypic.com/8gjis7a.jpg

Tyler
Spiffav8
12-20-2007, 09:29 PM
Looking good buddy! Be buy in a few days to have a look. :thumbsup:
PairOf69's
12-25-2007, 04:53 PM
What master/powerbooster is that, and how was the install...?
Teetoe_Jones
01-22-2008, 11:05 PM
The master is made by Wilwood, booster is by Master Power Brakes. Install was easy. We made the brake lines from 3/16" stainless with -3AN fittings.

Here is the engine bay after we got some of the plumbing done. Waiting on backordered fitting.

http://img227.imageshack.us/img227/926/img1783tq7.jpg

Tyler
Stuart Adams
01-23-2008, 04:29 AM
Looking good Tyler.
Tom.A
01-24-2008, 07:10 AM
Looks cool. The LSx with a Carb intake looks really mean. :thumbsup: