bone stock chevy 427 bigblock 66-69

[Bowtieracing]

Hello!

I am looking for a bone stock iron oval port head 427 cheverolet big block. Chevelle/camaro/impala/corvette. Anything goes. preferred from years 66-69.

Not need to be complete , no need to in working condition. Most important as close to 67 as possible.

pm me or reply here.

[DaleLee]

We have a 3869942 block which I believe is standard... may be .030 at the shop. I know we have the matching steel crank as well. Let me know if you have any interest. I think we also have a 396 numbered 3916323 which I know is std. I know these aren't 67 but they are close.

Hope this helps,
Dale Lee

[Short-Bus]

Hey Guys...
I have a virgin 1969 Corvette 427...Engine code is T1027LM...

Tonowanda built October 27th of '69...LM indicates it's a 2 bolt, 390 horse, oval port headed, steel cranked Corvette motor...It's complete and correct numbers from pan to intake and I believe it hasn't been opened up yet, making it all standard...Good compression on one side, marginal on the other...No bad noises when it turns over...Great for a rebuilder...

There is a partial VIN number on the block, so I have been trying to track down the original vette/vette owner, as he'd be pretty happy to get back his motor, but to no avail...I hate to give up on that, but cash talks...

Anyhow, this sounds like what you are looking for...PM me or e-mail me at [email protected] would like to get $2000 for the whole long block and I have NO idea what something like this would cost to ship from here in Portland, Oregon...