Will "wayne due" frame headers work with DSE frame ?

[Bowtieracing]

Stainless works have "wayne duy" headers for 1 gen camaro with LSx.

http://www.stainlessworks.net/cart/product_info.php?cPath=379_237_250_251&products_id=1166

Would these work with LS7 and DSE frame as well ??

[XcYZ]

Not sure if they would fit in the frame, but more importantly, those headers aren't the best for an LS7. The LS7 has a different port shape and those headers are 1 3/4". If there's anything about the LS7 that isn't up to par with the rest of the motor, it's exhaust flow. It really needs 1 7/8" primary or a 1 3/4 to 1 7/8 stepped header... and even more so if you do a cam swap.

[Bowtieracing]

Thanks again, Scott!

Yes i thought i would ask em to get me a weld on kit with 1 7/8" or even 2" primary pipes. But what could be difference between WD or DSE frames? Both are frontsteers etc. And take wide fronts . Scott you had a WD frame right? Have you ever compared it to DSE ?

[XcYZ]

Will SW do that? Back when I was looking for headers, that wasn't an option from them.

My frame is considerably different.

I went with Kooks 4th Gen F-body LS7 swap headers and then had Stenod Performance move the #1 primary for me.

[ProdigyCustoms]

The Rack and Pinion should fit, and I just happen to have a set of the Rack and pinion headers in stock!

[Bowtieracing]

The Rack and Pinion should fit, and I just happen to have a set of the Rack and pinion headers in stock!

Speaking of stock, have you any good news to me :):):)

[Gr8t68]

Thanks for the link to Stainless Works. Has anyone had any experience with Hooker's Super Comp Block Hugger Header: SBC LS–1,Tube Size 1.625", Collector Size 2.5", Port Shape: Round, Ceramic coated finish? Do these limit performance? Thanks.

[Vince@Meanstreets]

Speaking of stock, have you any good news to me :):):)
Frank, you going public? ;)

[ProdigyCustoms]

Hum, interesting idea. No, he is on pins an needles waiting for some parts I am grabing for him this weekend. But going public?

[Vince@Meanstreets]

sorry. you know...stocks... going public...share holders....:_paranoid