sam1
10-24-2007, 08:02 AM
Update.... Moving the car to Houston tomorrow to get it finished. Will still sell as a project if someone has interest.
Now has complete 406 with Edelbrock alumimum heads - complete carb to pan with accessories, HEI, etc. TH350 or Rebuilt M21. Motor/trans uninstalled.
Will sell the car with motor, either the TH350 and M21, all parts, for $14,900. One last shot before I bite the bullet and get it finished, will be off the market early next week.
Would sell without motor, trans for $12,500.
Have 18x8 and 18x10 TT2's with new tires available with the car for $850 - only if you buy the car...
Car will be on a trailer from Austin to Houston tomorrow. Have clear title.
And all of the below:
Rust free body mounted on powdercoated frame with new poly bushings. Global west upper and lower control arms up front with QA1 12 way adjustable coil overs, BMR upper and lowers rear. Front and rear sway bars included. AGR billet steering box with all steering components installed. Baer brakes installed up front with drilled/slotted 12” rotors. All suspension, brakes, steering parts have zero miles. Also have powdercoated core support, hood hinges, door hinges, bumper brackets, hood latch assembly, striker, and some other misc. parts. New fender brackets and battery tray. Rear end is a 12 bolt non posi, and date correct. Original drums still on the rear. New main 3/8 fuel line and brake lines installed. New gas tank, straps and sending unit. Original radiator cover in like new condition, new radiator shroud.
Body is straight/excellent, sprayed red with black stripes, and includes 2” cowl hood painted to match, also have cowl induction air cleaner – New in box. New front and rear bumpers (rear includes ss pad), new SS grille, new emblems, and other parts (turn signal/side marker lights as well). With some wet sanding and buffing, and touching up a 6” area on the upper rear quarter panel, you will have a very nice looking car. Not 10 point show car, but an excellent driver you could roll up to any cruise night and turn heads. All glass included and installed. Have original stainless trim which runs above doors on the drip rail. Front clip currently removed from car, but complete and ready to reinstall. Minor work is needed in 2 areas of the floor, trunk is perfect. New gas tank and strap kit. Prodigy customs stainless hardware kit NIB. NIB front and rear side lenses, NIB front turn signals. New radiator bushings.
Black Interior – SS idiot light dash, new dash pad with NIB speakers and very complete interior kit with fully assembled front and rear door panels, new armrests front and rear, original visors in very good condition, package tray, headliner, new SS steering wheel, arm rests, dome light, carpet, original kick panels, pair of front seat side metal, front and rear seat covers, steering column cover. New A pillar covers. New toe panel. Includes bucket seat cores as well. Interior currently gutted and ready for reinstall. Wiring harness still intact, with original heater controls still attached.
Parts and Powdercoating alone total close to my asking price. In austin, TX Thanks, John 512 748 5677
http://img527.imageshack.us/img527/4907/picture290dl0.jpg (http://imageshack.us)
http://img527.imageshack.us/img527/346/picture292rv3.jpg (http://imageshack.us)
http://img528.imageshack.us/img528/4827/picture291ji2.jpg (http://imageshack.us)
Now has complete 406 with Edelbrock alumimum heads - complete carb to pan with accessories, HEI, etc. TH350 or Rebuilt M21. Motor/trans uninstalled.
Will sell the car with motor, either the TH350 and M21, all parts, for $14,900. One last shot before I bite the bullet and get it finished, will be off the market early next week.
Would sell without motor, trans for $12,500.
Have 18x8 and 18x10 TT2's with new tires available with the car for $850 - only if you buy the car...
Car will be on a trailer from Austin to Houston tomorrow. Have clear title.
And all of the below:
Rust free body mounted on powdercoated frame with new poly bushings. Global west upper and lower control arms up front with QA1 12 way adjustable coil overs, BMR upper and lowers rear. Front and rear sway bars included. AGR billet steering box with all steering components installed. Baer brakes installed up front with drilled/slotted 12” rotors. All suspension, brakes, steering parts have zero miles. Also have powdercoated core support, hood hinges, door hinges, bumper brackets, hood latch assembly, striker, and some other misc. parts. New fender brackets and battery tray. Rear end is a 12 bolt non posi, and date correct. Original drums still on the rear. New main 3/8 fuel line and brake lines installed. New gas tank, straps and sending unit. Original radiator cover in like new condition, new radiator shroud.
Body is straight/excellent, sprayed red with black stripes, and includes 2” cowl hood painted to match, also have cowl induction air cleaner – New in box. New front and rear bumpers (rear includes ss pad), new SS grille, new emblems, and other parts (turn signal/side marker lights as well). With some wet sanding and buffing, and touching up a 6” area on the upper rear quarter panel, you will have a very nice looking car. Not 10 point show car, but an excellent driver you could roll up to any cruise night and turn heads. All glass included and installed. Have original stainless trim which runs above doors on the drip rail. Front clip currently removed from car, but complete and ready to reinstall. Minor work is needed in 2 areas of the floor, trunk is perfect. New gas tank and strap kit. Prodigy customs stainless hardware kit NIB. NIB front and rear side lenses, NIB front turn signals. New radiator bushings.
Black Interior – SS idiot light dash, new dash pad with NIB speakers and very complete interior kit with fully assembled front and rear door panels, new armrests front and rear, original visors in very good condition, package tray, headliner, new SS steering wheel, arm rests, dome light, carpet, original kick panels, pair of front seat side metal, front and rear seat covers, steering column cover. New A pillar covers. New toe panel. Includes bucket seat cores as well. Interior currently gutted and ready for reinstall. Wiring harness still intact, with original heater controls still attached.
Parts and Powdercoating alone total close to my asking price. In austin, TX Thanks, John 512 748 5677
http://img527.imageshack.us/img527/4907/picture290dl0.jpg (http://imageshack.us)
http://img527.imageshack.us/img527/346/picture292rv3.jpg (http://imageshack.us)
http://img528.imageshack.us/img528/4827/picture291ji2.jpg (http://imageshack.us)