PDA

View Full Version : Which tools would you guys recommend?

Birdman
10-24-2007, 09:30 AM
OK, since I'm setting up here and trying to get all the tools I need, I thought I'd see what you guys would recommend. Here's what I've got:

About every socket needed
About every screwdriver needed
About every pliers and adjustable wrench needed
Lots of crowbars and prybars
Several drills (still need a cordless one)
DA sander
HVLP sprayer
Impart wrench
Air ratchet
Grinder, angle grinder, and cutoff tool
Sawzall
Chop saw
Rotisserie
Lots of jackstands and a good jack
Powdercoating setup with oven
MIG welder (coming soon)
Lots of drop lights and things

And probably some other stuff I can't think of. What tools do you guys think I should get my hands on?
class67
10-24-2007, 10:04 AM
You may be a ways off from needing this, but how about:
heat gun
wire splicer / crimper
butt connectors
solder
soldering gun
heat shrink
test light
wire loom
Birdman
10-24-2007, 10:06 AM
Got all of that already. :thumbsup:
400bird
10-26-2007, 05:09 PM
blasting cabinet?
deuce_454
10-26-2007, 05:29 PM
a plasmatorch i couldnt live without mine... a good stationary grinder... one with long abrasive bands... a TIG welder, tube bender, a lathe.... a lift an oxy acetylene torch... and the list just goes on...
RaceMan
10-27-2007, 09:44 AM
How about a good press and a parts washer , I use both of mine.
deuce_454
10-28-2007, 11:33 AM
How about a good press and a parts washer , I use both of mine.
amen to the press..... the partswasher just makes me jealoux
badmatt
10-28-2007, 05:09 PM
press for sure parts washer/presure washer, blast cabinet,

LIFT ;)
hectore3
10-31-2007, 09:20 PM
OBDII reader
OOCustoms
11-11-2007, 10:29 PM
well it depends what you plan on building. im building my tools also. youll never have enough tools. i know i wont.

heres some equiptment i have and love.

2 sheet metal brakes, one is box and pan.
Tig welder with out a doubt! body hammers.
plama cutter.
bead roller
shrinker/strecher
shot bags
horizontial/ vertical bandsaw. A must if you work with and box or round tubing.
Mandrel tubing bender(next on my list)
Vertical mill
stud gun for body work.
Lots of air tools!!!!
and many more.
novanutcase
11-11-2007, 10:54 PM
Another jack.........

John