PDA

View Full Version : 4 link and minitubs finished!

ArisESQ
10-21-2007, 03:11 PM
After a lot of saving and planning, I finally got around to finishing up the 4 link and the minitubs.
Next step from here is to have my wheels modified a bit to take advantage of all the extra space, then its 335/30/18s!

I promised myself I woulden't post any pictures of my car until it looks EXACTLY the way I wanted it to, but this is close enough, and I'm pretty excited about it all :D

http://img144.imageshack.us/img144/5308/camarorear3pw0.jpg


:cheers:
ArisESQ
10-21-2007, 03:21 PM
also, i apologize for the massive picture. I haven't installe dphotoshop on my laptop yet... so yea.

fixed!
awr68
10-21-2007, 03:21 PM
Looking great! What wheels are those? Who's doing the work?
4cefed
10-21-2007, 03:21 PM
Thats a very clean car. Nice and simple.
awr68
10-21-2007, 03:25 PM
What 4-link? Got any build pics?
ArisESQ
10-21-2007, 06:12 PM
there we go. added a smaller pic :yes:


Its the DSE quadralink, and DSE minitubs. The cage, 4 link and minitubs were done at Pacific Fabrication in morgan hill, ca.

The car has been under construction for close to 7 years, so it feels really good seeing the car on the ground with close to the stance I wanted.
ironworks
10-21-2007, 06:14 PM
Wow that thing is really cool.
Stuart Adams
10-21-2007, 06:32 PM
Nice stance.
Mr.VENGEANCE
10-21-2007, 06:54 PM
hahahahha


how did we go from VWs to this.. :rofl:

looks great!
class67
10-21-2007, 07:08 PM
That looks really nice. :yes: I have to tear my car up and do the same thing soon.
ArisESQ
10-21-2007, 07:51 PM
I'll post some more pics when I'm a little more satisfied with some other stuff. I'm hoping to send my wheels out to get widened next week, and while they are gone I have a lot of plans to tune the front suspension a bit, just so it has a bit more of the stance I'm looking for (until I can afford the AME clip :unibrow: ), and remove the front bumper.

I was also waiting for a carbon fiber front spoiler, but the guy I was buying it from got a little too busy. I should give ATS a call soon.
It's been a really slow build, since I have really limited funds, and can only do one thing at a time... it's ocming along though!
awr68
10-21-2007, 08:08 PM
It will be worth the wait for sure!! All good things take time!! I'm turning the bend on 6 yrs on my car, so I know how you feel!!
mazspeed
10-21-2007, 10:06 PM
there we go. added a smaller pic :yes:


Its the DSE quadralink, and DSE minitubs. The cage, 4 link and minitubs were done at Pacific Fabrication in morgan hill, ca.



I saw that place a few months back when my car was being dynoed 2 doors down. Cool guys. They had some cool projects going on.
awr68
10-21-2007, 10:14 PM
ill, empty your PM box
ArisESQ
10-21-2007, 10:26 PM
ill, empty your PM box


whoops. all clean!
Tom.A
10-21-2007, 10:27 PM
Wow it looks good. More pictures would be great. What are the wheels and what size are rear tires.
Rybar
10-21-2007, 11:13 PM
Stance and wheels are killer. :thumbsup: What size are the rears in that pic?
Vince@Meanstreets
10-21-2007, 11:43 PM
looks good, and congradulations getting it out.

Hope you make it to the Goodguys show. Let me know if you need any help.
ArisESQ
10-22-2007, 12:24 AM
Stance and wheels are killer. :thumbsup: What size are the rears in that pic?


The rears are currently 18x10 w/ 5.75 inches backspace, and I was running 295s. it was really really snug before, and now that there is no issue on the inner fender, i need to play with the offset to get them to sit further in the well.

and thank you!
COYBILT
10-22-2007, 03:06 AM
The rears are currently 18x10 w/ 5.75 inches backspace, and I was running 295s. it was really really snug before, and now that there is no issue on the inner fender, i need to play with the offset to get them to sit further in the well.

and thank you!


I know that snug feeling you talk of, but I did the same thing to my Gto and could put a 355 if i wanted. I am loving the look of the camaro, really looks great. Oh how wide is the rim still a 18x10?
Rebird
10-22-2007, 07:00 AM
Looks great!!! A+++++++++
Garage Dog 65
10-22-2007, 07:49 AM
It's been a really slow build, since I have really limited funds, and can only do one thing at a time... it's ocming along though!

Aren't they all like that ?? (or does it just feel like it...)

Excellent work !!!

Congrats on finishing her up and surviving the long journey - came out very nice and you should be proud sir !!
ArisESQ
10-22-2007, 08:31 AM
I know that snug feeling you talk of, but I did the same thing to my Gto and could put a 355 if i wanted. I am loving the look of the camaro, really looks great. Oh how wide is the rim still a 18x10?

Currently it is an 18x10, but it will soon be an 18x12 or so.

And thanks for all the encouragement! It's not completely done yet, but seeing it on the ground definitely motivates me to spend the time to finish it!
Payton King
10-22-2007, 11:13 AM
I am diggin' the white color as well. Not enough white ones
Spiffav8
10-22-2007, 11:23 AM
Love the stance. I really dig this car :thumbsup: Congratulations on reaching this point in your build. Very Cool!

Looking forward to seeing more soon.
mark smith
10-22-2007, 02:52 PM
car looks real nice.worth the wait to do it right.
Ummgawa
10-22-2007, 06:30 PM
What a wicked stance...you must be excited!!!
rich-allen
10-23-2007, 08:39 AM
That's one bad 67

Those wheels and KD's look good too
rockdogz
10-24-2007, 12:54 AM
Wow, looks killer! :thumbsup: