Will these fit? 69 Camaro

[bigtyme1]

18x10 7 3/8 bs
18x12 5.5 bs

DPE wheels GT7 series (two piece)
http://www.dpe-wheels.com/wheels.htm

I'm using a stock subframe and the rear will be mini tubbed. It's a good deal but I don't know if they will fit.

[camcojb]

18x10 7 3/8 bs
18x12 5.5 bs

DPE wheels GT7 series (two piece)
http://www.dpe-wheels.com/wheels.htm

I'm using a stock subframe and the rear will be mini tubbed. It's a good deal but I don't know if they will fit.


the rears are fine depending on rear end length. I don't think the fronts have a chance with that width and amount of b.s. Sounds like they were made for an aftermarket clip with a wider track than a stock Camaro.

Jody

[AllSpeedAndy]

I'm with Jody, fronts won't work on stock sub, unless you're going with a wide body kit....other wise I wouldn't go any wider than 8"

[bigtyme1]

Thanks Guys

[AllSpeedAndy]

the Wheels on the Rogue Camaro are

18x8 w/ 5" bs, front suspension is air ride strong arm with g-max spindles and it just clears the sub front to back, lock to lock and just...I mean just clears the tie rod enough to work.
19x11 w/6.5" bs , the housing is 57"'s axle face to axle face, minus the 1/4" rotor hats(57 1/2"'s total)...with DSE mini's, lots of room!! up or down with the bags.