New manifold showed up today

[camcojb]

Looks nice I think.

http://www.camcojb.com/twinturbo/hogan%20002.jpg
http://www.camcojb.com/twinturbo/hogan%20003.jpg

Jody

[XcYZ]

Wow... just wow.

Hey Jody, e-mail a front shot like that 2nd pic, but in higher res, I'll PhotoChop it for a really cool wallpaper.

[jonny51]

Yeah I would say that looks pretty nice :p

[mdprovee]

No it doesn't look nice, it looks freakin amazing.

Mike

[Ummgawa]

Man, that is one wicked looking motor. Looks kinda like R2D2 on Steriods!!!

[zbugger]

That looks absolutely insane. Will it still fit under the hood? If not, I don't think you need to run a hood. It's just too puuurrdy to cover up.

[camcojb]

That looks absolutely insane. Will it still fit under the hood? If not, I don't think you need to run a hood. It's just too puuurrdy to cover up.


It better Allen! I'm almost positive it will from measuring Dons Stealth Ram, pretty close to the same and his clears easy.

Jody

[Novacane]

NICE!!!!!!!!!!!!!!!!!!!

Got to love aluminum!!!!

When's it gonna' be runnin??

[camcojb]

NICE!!!!!!!!!!!!!!!!!!!

Got to love aluminum!!!!

When's it gonna' be runnin??


Should be ready to fire late January/early February. I have the hotels booked for Power Tour so it better be done by then.

[JamesD]

what is it about fabricated aluminum parts that look so cool?

[Musclerodz]

I got one word, SICK!!!

Mike

[c.schulz]

Should be ready to fire late January/early February. I have the hotels booked for Power Tour so it better be done by then.


Hey Jody need a co-pilot????? Please??? :D

[Stuart Adams]

AWESOME!!!! You will be styling on the Power Tour.

[61Bubbletop]

My goodness :eek: , Jody, you should just put that whole engine in a glass case!...Looks fantastic my friend, and that is about as much an understatement as there ever was!

[hotwheels]

wow, that is pretty........mine is almost like that......i sprayed it with a can of aluminum paint from autozone...... :D

[Ricochet]

Looks nice I think.

Ya' think??.... I know!! Very nice piece there Jody!! You scored bigtime!! :cool:

[camcojb]

Thanks guys, I appreciate it!

Jody

[Blown353]

Jody, what's the plan for linkage? Are you planning on a a rod end / link / bellcrank system to tie both TB's together and then using a single cable to work the bellcrank?

It's hard to tell in the photos but are the TB's feeding seperate plenums for each bank, or one common plenum? If it's a common plenum having the TB's slightly out of sync wouldn't be a big issue, but if they're each feeding a seperate plenum then I'd want them as sync'd as possible!

Looking good... :)

[camcojb]

Jody, what's the plan for linkage? Are you planning on a a rod end / link / bellcrank system to tie both TB's together and then using a single cable to work the bellcrank?

It's hard to tell in the photos but are the TB's feeding seperate plenums for each bank, or one common plenum? If it's a common plenum having the TB's slightly out of sync wouldn't be a big issue, but if they're each feeding a seperate plenum then I'd want them as sync'd as possible!

Looking good... :)


I'll let you engineer it Troy! I'm going to try turning them so the throttle shafts are in line with each other horizontally and connecting the two shafts and using a single cable for throttle. They feed a common plenum thankfully!

Jody

[Steve Chryssos]

In-FREAKIN-Sane!!
In-FREAKIN-Sane!!
In-FREAKIN-Sane!!

[camcojb]

In-FREAKIN-Sane!!
In-FREAKIN-Sane!!
In-FREAKIN-Sane!!


And it'll be that much better with your Shrifter, huh??????!!!!!!!

Thanks again Steve!

Jody

[parsonsj]

You're not gonna actually put that in a car and drive around are you? :eek:

Anyway, congrats! Looking forward to more.

jp

[67Sally]

Damn!!!!!!

[camcojb]

You're not gonna actually put that in a car and drive around are you? :eek:

Anyway, congrats! Looking forward to more.

jp


Hey, I wouldn't talk John! :D Yours is way tricker than mine, my car is a bolt-together ride pretty much, yours is a hand fabricated one, and done very well at that!

Jody

[Steve Chryssos]

And it'll be that much better with your Shrifter, huh??????!!!!!!!

Thanks again Steve!

Jody

Well yeah. It will. Very positive response here at PRI.

[camcojb]

Well yeah. It will. Very positive response here at PRI.


That's great Steve. You will do well my friend, a really cool product.

Jody

[Jay Hilliard]

Dont mean to offend anyone else's TT configuration, but that is the best TT setup I have ever seen. Awesome Jody!

[Stielow]

Jody

What are you doing for a water cross over in the front?

Stielow

[camcojb]

Jody

What are you doing for a water cross over in the front?

Stielow


Hey Mark! I'm using an LT1, no water in the intake.

Jody

[lil427z]

jody , how much did you spend , where did you get , would you let me know so i can spend more money on my camaro .




thanks rick kirkindall
214 908 2100 call me :D

[camcojb]

Rick,

I was lucky to find a guy who was looking at my turbo headers and he told me he had this LT1 setup for sale. I bought it complete with the throttle bodies for $1900 brand new. It goes for about $3800 from Hogans with the Accufab throttle bodies.

Jody

[lil427z]

jody , i have a427 sbc , hilborn efi , ft runner pully set up , 6 spd richmand
in my camaro . i am building a new motor w, twin banks turbos . it is all being done as w talk . and i like the way the hogan intake looks .




thanks rick kirkindall

[camcojb]

jody , i have a427 sbc , hilborn efi , ft runner pully set up , 6 spd richmand
in my camaro . i am building a new motor w, twin banks turbos . it is all being done as w talk . and i like the way the hogan intake looks .




thanks rick kirkindall


Very cool setup Rick. I did the Hilborn EFI in a small block Cobra replica, LOTS of fun and looks awesome. You know the Mule started off as an IR setup and when they went to turbos they retained the manifold and fabbed up the trick plenum and dual throttle bodies.

I think the Hogan looks great also and am glad the deal came up. I was going to run a modded single plane I had done for the LT1 with a Wilson 90 degree elbow and single throttle body, similar to what I did on my last Camaro just to be different. But the Hogan is another step beyond that and will be worth the extra effort of getting it on there.

Good luck with your project and be sure to keep us updated with pics!

Jody

[jonny51]

jody , i have a427 sbc , hilborn efi , ft runner pully set up , 6 spd richmand
in my camaro . i am building a new motor w, twin banks turbos . it is all being done as w talk . and i like the way the hogan intake looks .




thanks rick kirkindall
Rick was it your car I just saw in PHR?

[lil427z]

jonny . it was in nov 2004 popular hot rodding cover car . johnny hunkins did me right. with the photo shoot . :D :D




thanks rick kirkindall

[jonny51]

Cool Rick,very nice ride.I thought about doing a white car with black stripes,there is something very clean about that combo.

[XcYZ]

Rick, here are a some pics of Hogan's intakes on a couple of cars here on Lateral-g. I love the way they look.

Monty Williams Twin Turbo small block 427:

http://www.lateral-g.net/williams/installedintakesideclose.jpg


Here's Brent Dupont's 502:

http://www.brentdupont.com/nickelback/motor/NickelbackMotor2.jpg

[XcYZ]

And here is the link you were asking for:

http://www.hogansracingmanifolds.com (http://www.hogansracingmanifolds.com)

[lil427z]

scott , thanks for your help .




rick kirkindall

[Y-TRY]

Dang it, Jody, you guys need to stop raising the bar!!

That intake looks great and it's good to see the engine all together. I woulda been happy with a modified single plane and elbow until I saw this. Time to start saving.

[kmracer]

jody , how much did you spend , where did you get , would you let me know so i can spend more money on my camaro .




thanks rick kirkindall
214 908 2100 call me :D
thats a hogan intake.... i think its like $2800

http://www.hogansracingmanifolds.com
i think they are beautiful..... pricey but if you got it... worth it. :thumbsup:

[camcojb]

thats a hogan intake.... i think its like $2800

http://www.hogansracingmanifolds.com
i think they are beautiful..... pricey but if you got it... worth it. :thumbsup:


I got that setup new for half price which is why I have it. At their normal price I would not have been able to do it.

Jody

[kmracer]

cool :unibrow: do you know him or something?

[camcojb]

cool :unibrow: do you know him or something?

No, got it from a guy who used it for mockup on his LT1 and decided to build a 1500 HP turbo small block and went with a standard small block Dart block and could no longer use this LT1 version.

Jody

[JamesJ]

Sorry if this has already been covered but, what are the plans for the transmission? Are you going to put in an auto and use the paddle shift, or are you going with a manual gear box? If yes to the auto was that the reason for going with a LT-1? On Edit: just noticed that you are going with the 4l80e

[camcojb]

Sorry if this has already been covered but, what are the plans for the transmission? Are you going to put in an auto and use the paddle shift, or are you going with a manual gear box? If yes to the auto was that the reason for going with a LT-1? On Edit: just noticed that you are going with the 4l80e


James,

Originally had a modified T56 going in it with a McLeod dual disc clutch and Teetoe Jones' install kit. Then I got the bug for an auto after speaking with Mark Stielow about how fun it was to drive the Malitude.

Yes, I'm using a paddle shifter, actually just shipped and has invoice #1

Jody

[kmracer]

No, got it from a guy who used it for mockup on his LT1 and decided to build a 1500 HP turbo small block and went with a standard small block Dart block and could no longer use this LT1 version.

Jody
thats cool... i wish i had friends like that

haha i diddent relize that you guys covered everyhting i said a page back... i wish they had the slap face smiley lol.

[camcojb]

thats cool... i wish i had friends like that

haha i diddent relize that you guys covered everyhting i said a page back... i wish they had the slap face smiley lol.


:D

Jody

[fleetus macmullitz]

Looks nice I think.

http://www.camcojb.com/twinturbo/hogan%20002.jpg
http://www.camcojb.com/twinturbo/hogan%20003.jpg

Jody


It's actually 'old thread week' all over the internet.


:D

[camcojb]

smart ass... :lol:

[Ummgawa]

It's actually 'old thread week' all over the internet.:D

Heard that!

smart ass... :lol:

First time in a while "ass" and "Charlie" haven't been mentioned in the same sentence.