1969 X-55 Shell completly restored!

[fletcherscustoms]

I have been holding onto the car hoping that I would get to finish it and turn it in to my dream. But the shop is slammed, space is at a minimum and cash is needed to upgrade some things in the shop. The car is ready for bodywork, paint and suspension. All metal work is done and done right. Mike's customs cars did the sheetmetal replacement and there are tons of pics available at http://www.mikescustomcars.com/projects/projects.asp?proj=CFletcher69 Car is minitubbed with DSE tubs and has every piece of sheetmetal replaced, I mean everything!!

Here is the specs!
-1969 Camaro Coupe, original X-55, 350/3 speed SS car, have title , vin, trim tag, hidden vins, etc. Two big boxes of original bolts, brackets, etc

$17,500
Call me @ 229-221-4690 or email at [email protected]

-**Car has no suspension or subframe. Plans called for DSE front and rear so stock stuff was sold.

-Sheetmetal replaced-- All panels where stipped of original EDP coating, sprayed with bed liner on inner sides, and all panels are covered with PPG epoxy
-Both full Dynacorn quarters
-Dynacorn tail panel
-Dynacorn roof skin
-Dynacorn roof structure supports
-Goodmark outer fenders
-DSE mini tubs
-Goodmark one piece trunk pan
-Goodmark one piece full floor
-Mike's Custom cars full frame rails
-Goodmark rear filler
-NOS package tray
-Dynacorn full inner and outer Rockers
-dynacorn complete dash assembly
-Dynacorn complete firewall, with both tulip panels
-Goodmark cowl panel
-Goodmark RS front fenders and lowers
-Goodmark? inner front fenders
-Goodmark upper and lower front panels
-GM New RS grill with hardware
-GM and Goodmark parts and hardward for front end and lights, everything lights, hoses, pumps, etc all new mix of GM and aftermarket
-if it was available it was replaced. this is as new of a car as you can get

[fletcherscustoms]

I forgot that I also have

-New Goodmark doors
-New decklid
-And will provide a new 2" cowl Goodmark hood

[aany001]

where is the car located?

[fletcherscustoms]

South GA, 31738

[Payton King]

at www.camaros.net as well

[clill]

Amazing amount of work. If nobody has looked at the pics they are worth the look just to see how many parts are in a Camaro shell.:thumbsup:

[Ummgawa]

Wow. That is sweet. What a great foundation for a new G ride, already minitubbed too.

[CRCRFT78]

S*** I'm lucky I know how to do basic maintanence. To be able to do work like this is amazing. Nice work. Good luck with the sale.

[fletcherscustoms]

Come on I know somebody wants one of the nicest shells on the face of the earth. This thing is ready for your majic touch!

[Payton King]

I finally took the time to look at all of the build pics. Holly crap was that a total re-do.

I like it...I like it a lot! I am not ready for it now, but it has me thinking

[ChevyThunder]

Mike has done a few cars for me and I can tell you he is meticulous! When you figure what they sell a fake tiawan body for that is not anywhere near as nice as Mike's work .. this is a steal .

[waynieZ]

My car is on Mikes jig being done right now, you can't believe how fussy he is .I've been to his shop three times and it is always imaculant . His work is excelent. Wayne

[HeadInTheClouds]

I looked through the pics and all I can say is wow! That is how I would want my 69 done. No rust coming back to haunt ya. Well, not because you half arsed it. I wish I had the kind of money all these guys do for their projects! I dont think my bank would swing a loan on a 17500 69 shell! I dont have that much cash lying around either:( That is exactly what I want though. Suppose I could sell the 06 gto. Best of luck on sale and its looks like you do spectacular work!

[Aschle]

I am another that does not have the funds to allow purchasing this thing.... I would love to though, that is amazing !!!! I am sure it will sell though, too nice to pass up (if one has the $) not that much $ considering...

Jason

[fletcherscustoms]

This thing needs to go. Taking up valuable floor space that could be used for customer cars, lol!! :thumbsup:

[Vince@Meanstreets]

This thing needs to go. Taking up valuable floor space that could be used for customer cars, lol!! :thumbsup:

Might know someone. I will check this weekend.

Can you post up new pictures and a new price? I would pick up and pay cash.

I thought you needed a new shop beater? heeehee just kidding. You don't have to tell me about valuable shop space.

[fletcherscustoms]

New price is $16,500

shoot me a email for pics [email protected]

[buickfunnycar.com]

Wow...has to one of the finest starting points in the nation.:yes:

Awesome work...:thumbsup:

[bigtyme1]

Mike and Brian Riggs do some great work, they have helped me out with alot. you can bet this body was built to last forever. Wish I hade the cash.