4 Link question

[akrapovic]

I'm looking to get a ballpark figure on the cost of installation of a Alston 4 link gbar set up on my 1969 camaro. I'm new to the game so I don't want to get taken advantage of.

Thanks in advance

[sunset68]

If you are near FLA, talk to Frank at Prodigy, end of story. If you aren't, talk to Frank and do it yourself, either way he will hook you up with the best price and top quality service.

Chris.

[Flash68]

If you are near FLA, talk to Frank at Prodigy, end of story. If you aren't, talk to Frank and do it yourself, either way he will hook you up with the best price and top quality service.

Chris.

Good call for sure.

Chris, you have any pics of your Camaro? I wanna see that paint color!

[ProdigyCustoms]

It is a do it yourself install except for the welding on the rear. You should be able to pull the rear, take it to a welder and reinstall. If it came into the shop, we would charge 8 hours for a install incliding the rear end tabs.

Let me know when your ready and we will take care of you on the kit.

[sunset68]

Mmmmm...Sunset orange it makes me all fuzzy inside......


http://i99.photobucket.com/albums/l288/sunset68camaro/DSCN0214.jpg

http://i99.photobucket.com/albums/l288/sunset68camaro/DSide1.jpg

[Flash68]

Sorry for jackin the thread!

Gorgeous orange color...

back to the 4 link stuff, which does pertain to me....

[akrapovic]

I gave Frank a call and he was extremely helpful. Thanks for the heads up.

[69x22]

Hey Sunset, beautiful car, what are the widths of the wheels, and what did you do to get the stance?
Thanks

[sunset68]

Thanks, the wheels are 17x7 in front, and 17x9.5 in back. Although the yokohoma's on the back make the rears look wider. The rear rims have the wrong backspacing so they didn't fit perfect, although I got a swinging deal on them that I couldn't refuse. In the future, I am going to an 18" rim and at that time I may be able to stuff a little more in there. In front, I have BMR upper and lower control arms, stock spindles, and QA-1 coilovers. I don't have the front dropped all the way, I am running headers and they scrape bad the way it is with the roads around here. In back everything is stock, the pics make the back look better because my driveway is inclined. It is running pretty high in back. I am looking at going to a g-bar four link and a 9 inch as soon as I sell a kidney. Thanks for compliments,

Chris.

[jason@gmachine]

I gave Frank a call and he was extremely helpful. Thanks for the heads up.


where are you located?


Jason