Cars Going to SEMA 2007

[chucks73]

This worked out Great last year so let's do it again.

I don't want to miss one PT car this year. So if you have a car that will be on display at SEMA Please give as much info as you can.

Vendor
Booth#
What kind of car.
A Picture finished or not would be GREAT.

Hope to see all of you there.

OK as of 10/23/07 this is what I have
Nemesis Motorsports 50352 67 Mustang Hdesign
Wilwood Disc Brakes 25113 68 Camaro Pad Penny
Goodyear/Dunlop 41409, 41427 Bob???
Nitrous Express 23057 Camaro KD hot Rods
American Autowire 50030 Camaro Vipercuda
Grant Products Internation 22373 Cuda Vipercuda
Atech Motorsports 20879 Hemi Dart theKrook
Snap-On Equipment 41944, 42044 Larry Chop-Shop Customs
Sony Electronics Inc. 11170, 10980 Norms Truck theKrook
MagnaFlow 70007 (Front Parking Lot) II Much (67 Nova) John Parsons
ProCharger 24365 Prodigy Vette

* Gear Vendors Overdrive 22873 72 Torino Steve Strope PureVision
* Electric Life 22991 69 Firebird Prodigy Customs Lisa Serafine
* Twist Machine 21085 Devious built by Jason Huber
* iForged 44909 69 Camaro Mizfit Motors Taylor Day
* HP Performance Products 50144 71 Cuda Time Machines Mike Staveski

* Information from Popular Hot Rodding Dec 2007 Issue

[vipercuda]

Hi guys,

It is Mike from Time Machines. I am launching a new car at SEMA this year. The line is called Modern Muscle. We will be building three types of cars; 69 camaro, 70-71 cuda, and 69-70 Mustang Fastback. There will be two models of each car. One model is a complete chassis car, we are using Art Morrison for the chassis. The other model will be a updated bolt-in suspension style build. We are developing both independent front and rear suspensions for the cuda. The camaro & mustang will utilize the current pro-touring aftermarket kits on the market.

The camaro and the cuda will be at SEMA this year. Both prototypes are full chassis cars. The camaro utilizes all C-5 vette suspension. The front is all Morrison and rear suspension is all 21st Century Street Machines. The camaro will be in American AutoWire's display at SEMA.

The cuda is all AME chassis. It is mustang II front and their rear suspension with 4.56 gears. It has a six speed and a big 540 Hemi by HP Performance. It will be in HP Performance's display at SEMA.

I know you guys will ask for pictures but I am not ready to share pictures just yet but I can tell you that Jason Rushforth helped me with the design of all three cars. I can tell you that Jason is a pleasure to work with, this line has been in my head ever since we built the Motion camaro and has only gotten better with Jason's input. No the camaro will not look cartoonish.. It is all 69 camaro

I will be ready to share some pictures in a few weeks so please be a little patient.

Thanks and see you at SEMA,
Mike

[Hdesign]

Can't wait to see them Mike!

Nemesis Motorsports
67 Mustang
Booth # 50352

Adding the updated rendering tonight

[chucks73]

Mike, Will the cars be at the Time Machine booth 21182 or out front??

[kennyd]

the kd hotrods camaro will be in the nitrous express booth
the 57 chevy still working on the spot ( maybe changing booth spots )
and a 64 nova streetcar in the greg weld booth

[Steve1968LS2]

Wilwood Brakes
Booth #25113
'68 LS2 powered Camaro

http://picsorban.com/upload/moneyshot.jpg

[vipercuda]

Both of my cars are scheduled to be in Hot Rod Alley. The camaro will be in American Auto Wire's display and the cuda in HP Performance's display. I don't always like to put booth #s down this early because they can always change. AAW booth # is 50030 in Hot Rod Alley. HP is right near them in Hot Rod Alley but they are trying to move their booth like many companies do... I am trying to get a bigger booth too so I can fit a car but right now my booth is 21182. It is right across from Twist Machine's. We will be showcasing new parts from the line.

Thanks again,
Mike

[Mizfit]

Looks like "Ouroboros" is going to be a iforged feature car. They have already booked their booth cars but the were nice enough to let us in as a feature car since we were last minute and we will be put in a hallway or something. But just excited to be going:thumbsup:

Taylor

Mizfit MotorSports

[Diognes56]

Man oh man I wish I could go :yes: :( .

David

[V8TV]

Man oh man I wish I could go :yes: :( .

David

We'll take you there... we've got LOTS of SEMA coverage - the cool stuff - planned for this year!

- Kevin Oeste

[vipercuda]

Our cuda will be in Grant Products booth #22375 in central hall right below the Ford Display. Jason Rushforth helped me design this one. This car is a blend of both of our styles but he designed one awesome wheel that we are using on both our cuda and camaro. We will be offering this wheel once the cars are debuted. It is a very nice unique design. Jason has been incredible to work with on my new car line. He has very innovative concepts.

Thanks
Mike

[MarkM66]

:ttiwop:

Just saying "my car" on some of these post doesn't tell us much. How about a pic?

Like Steve did.

[vipercuda]

I know everyone would like to see pictures but as I said in my first post I am not ready to share pictures of the cars yet. We are doing an 11:00am unveiling of the camaro in American AutoWire's display. I am attaching the invitation that has been sent out to the industry. Please know all members of Lateral G are invited to come to the American Autowire display at 11am on Tuesday to see the camaro. I am working out the details for the cuda now.

Thanks
Mike

[J2SpeedandCustom]

Bob will be in the Goodyear booth - 41409 / 41427.

[chopshop]

Ill be part of the Snap On Tools GLO-MAD build so I guess thats partly my car (You may find me in the Snap On booth) and Ill have one out there for the tuner crowd painted in Alsa heat paint- kinda like the mood ring paint of 2007.Not sure where that one will be though...

Here are some GLO MAD pics
http://www.chop-shopcustoms.com/glo_mad/776190155_591aa4810b.jpg
http://www.chop-shopcustoms.com/glo_mad/777125820_dc72c3fc86.jpg
http://www.chop-shopcustoms.com/glo_mad/776372913_b8d13af1eb.jpg
http://www.chop-shopcustoms.com/glo_mad/779120908_70aed0119d.jpg

Ill try to get more this week...

[theKROOK]

We are blessed to have been chosen to be the authorized distributor of Mr. Norm's Performance Vehicles. I will be at SEMA showing off the first production continuation series Hemi GSS Dart after debuting it at the Playboy Mansion October 19th. She will be shown at the ATAC Motorsports Booth #20879. Attached are pics of the rave cards we will be thrusting into people's hands at Playboy Mansion and at SEMA. I have Mike at NAMTRA Media for doing such a good job.:bow: (I will have photos of the actual car in about a week.)

The bigger news is the Mr. Norm's Super Truck which will be debuting at the Sony booth #11170. This is the promo vehicle for a limited production of 100 brand new Mr. Norm Super Trucks based off of the 2008 Ram 1500. Once I get a copy of the film on this hummer to use in advertisements, I will post a shot or two here. Until then, use your imaginations. :wow:

[syborg tt]

that's really cool. My dad has told me many story about Mr Norm and his cars.



We are blessed to have been chosen to be the authorized distributor of Mr. Norm's Performance Vehicles. I will be at SEMA showing off the first production continuation series Hemi GSS Dart after debuting it at the Playboy Mansion October 19th. She will be shown at the ATAC Motorsports Booth #20879. Attached are pics of the rave cards we will be thrusting into people's hands at Playboy Mansion and at SEMA. I have Mike at NAMTRA Media for doing such a good job.:bow: (I will have photos of the actual car in about a week.)

The bigger news is the Mr. Norm's Super Truck which will be debuting at the Sony booth #11170. This is the promo vehicle for a limited production of 100 brand new Mr. Norm Super Trucks based off of the 2008 Ram 1500. Once I get a copy of the film on this hummer to use in advertisements, I will post a shot or two here. Until then, use your imaginations. :wow:

[theKROOK]

that's really cool. My dad has told me many story about Mr Norm and his cars.

Good Job DAD~! :yes:

I sat down with Mr. Norm himself: Mr. Norm Interview, Pt. 1 - How the '68 Dart GSS Was Created

http://www.youtube.com/watch?v=box60rO7C50

[syborg tt]

cool video

ps I can't tell you how many times i've driven past the old dealership.

[chucks73]

Up-Date on Page 1 (10/18/07)

[Stuart Adams]

SEMA is coming up VERY fast. Good luck to you guys burning the midnight oil to get your projects finished.

[ProdigyCustoms]

12:14, yup, Midnight oil here. But were actually in good shape and spliting early tonight. Should be on the road straight through Firday morning with a convey of cars coming ou of Orlando

thanks for the well wishes

[chucks73]

OK as of 10/23/07 this is what I have
Nemesis Motorsports 50352 67 Mustang Hdesign
Wilwood Disc Brakes 25113 68 Camaro Pad Penny
Goodyear/Dunlop 41409, 41427 Bob???
Nitrous Express 23057 Camaro KD hot Rods
American Autowire 50030 Camaro Vipercuda
Grant Products Internation 22373 Cuda Vipercuda
Atech Motorsports 20879 Hemi Dart theKrook
Snap-On Equipment 41944, 42044 Larry Chop-Shop Customs
Sony Electronics Inc. 11170, 10980 Norms Truck theKrook
MagnaFlow 70007 (Front Parking Lot) II Much (67 Nova) John Parsons
ProCharger 24365 Prodigy Vette

* Gear Vendors Overdrive 22873 72 Torino Steve Strope PureVision
* Electric Life 22991 69 Firebird Prodigy Customs Lisa Serafine
* Twist Machine 21085 Devious built by Jason Huber
* iForged 44909 69 Camaro Mizfit Motors Taylor Day
* HP Performance Products 50144 71 Cuda Time Machines Mike Staveski

* Information from Popular Hot Rodding Dec 2007 Issue

[chucks73]

OK as of 10/23/07 this is what I have
Nemesis Motorsports 50352 67 Mustang Hdesign
Wilwood Disc Brakes 25113 68 Camaro Pad Penny
Goodyear/Dunlop 41409, 41427 Bob???
Nitrous Express 23057 Camaro KD hot Rods
American Autowire 50030 Camaro Vipercuda
Grant Products Internation 22373 Cuda Vipercuda
Atech Motorsports 20879 Hemi Dart theKrook
Snap-On Equipment 41944, 42044 Larry Chop-Shop Customs
Sony Electronics Inc. 11170, 10980 Norms Truck theKrook
MagnaFlow 70007 (Front Parking Lot) II Much (67 Nova) John Parsons
ProCharger 24365 Prodigy Vette

* Gear Vendors Overdrive 22873 72 Torino Steve Strope PureVision
* Electric Life 22991 69 Firebird Prodigy Customs Lisa Serafine
* Twist Machine 21085 Devious built by Jason Huber
* iForged 44909 69 Camaro Mizfit Motors Taylor Day
* HP Performance Products 50144 71 Cuda Time Machines Mike Staveski

* Information from Popular Hot Rodding Dec 2007 Issue

[kennyd]

and now we have the 57 in budnik wheels booth

[syborg tt]

and now we have the 57 in budnik wheels booth

shouldn't you be working on something

[HRBS]

shouldn't you be working on something

With all his bad luck lately, can you blame him ?

The lawn tractor story was the best.

[syborg tt]

With all his bad luck lately, can you blame him ?

The lawn tractor story was the best.

No I think it was the Washing Machine Fire

[HRBS]

No I think it was the Washing Machine Fire

:lol: I guess it pays to stay dirty !
I had that happen in my furnace. The blower motor caught fire !

[JayR]

I'll have 11 cars there that I designed and four of them will be running the new line of wheels!

This car www.rushforthwheels.com/gallery will be on the ramp from the Ford booth to Hot Rod Alley. It belongs to David Sharpe and was built by Jared Hancock.

[theKROOK]

We are blessed to have been chosen to be the authorized distributor of Mr. Norm's Performance Vehicles. I will be at SEMA showing off the first production continuation series Hemi GSS Dart after debuting it at the Playboy Mansion October 19th. She will be shown at the ATAC Motorsports Booth #20879. Attached are pics of the rave cards we will be thrusting into people's hands at Playboy Mansion and at SEMA. I have Mike at NAMTRA Media for doing such a good job.:bow: (I will have photos of the actual car in about a week.)

The bigger news is the Mr. Norm's Super Truck which will be debuting at the Sony booth #11170. This is the promo vehicle for a limited production of 100 brand new Mr. Norm Super Trucks based off of the 2008 Ram 1500. Once I get a copy of the film on this hummer to use in advertisements, I will post a shot or two here. Until then, use your imaginations. :wow:

Just got the press release photo of the GSS

RESIZED BELOW BY chucks73 thanks!

[chucks73]

Very cool looking car. Here is a little help with the sizing.:)




http://photos.imageevent.com/chucks87/corvettecamaro/final.jpg

[syborg tt]

The car looks really nice

[4OfaKind]

Keep an eye out for this car: (Not sure which booth it will be in)

http://www.robidaconcepts.citymax.com/i/challenger/rendering2.jpg

http://www.robidaconcepts.citymax.com/page/page/2076961.htm Use this link for the build photos.

[DriverzInc]

http://i37.photobucket.com/albums/e99/Hensons/Joker_VIAIRFLYERSEMA.jpg

We're leaving tomorrow, "sunday" to get the car in the booth tomorrow night, or Monday morning. Come by and visit the team from Driverz!