Dse 69 camaro dash

[surreyboy]

Had a spare 25 or so hours this weekend, so i installed it in my 69 .Im an idiot so i ordered it blank so i had to make my own holes for the headlights and wipers along with the gauges.Got chrome l.e.d lights for the signal lights, had to pop out one green one and put a blue led bulb in for the high beams.The piece fit pretty nice being the cars so old and this piece is new.now the interior looks alot better as the stock dash looked dated


http://www.photopile.com/photos/sixtwodonger/camaroa/294787.jpg
http://www.photopile.com/photos/sixtwodonger/camaroa/294788.jpg
http://www.photopile.com/photos/sixtwodonger/camaroa/294789.jpg

[ibdmann]

those gauges look very cool in that dash

[XcYZ]

Cool. :thumbsup: If/when you cut the radio in, be sure to cheat it to the right and not center it.

[GHOSTDANCER]

Looks good :thumbsup:

[Sales@Dutchboys]

:thumbsup: looks AWSOME!

[70TWO NOVA]

good choice in gauges:)

[awr68]

Looks good, the DSE dash is the only way to go in a '69!!!

[slenning]

Looks great, love the guages

[tones2SS]

Nice guauges, they look great on that dash!!

[mark smith]

I need to do the same thing.did you use a hole saw or a jig saw to cut the larger holes?

[surreyboy]

i used a hole saw, as long as you keep it level with the metal it cuts ok, anything crooked and the hole saw likes to jam up, i used a 2 inch one for the small guage and a 4.5 inch one for the speedo and tach, had to file the 4.5 out because they require 4 5/8 hole , but i couldnt find a 4 5/8th hole saw

[Rybar]

Looks good Paul, when we gonna hook up for a cruise?

[surreyboy]

just finishing up mistakes the shop made