1972 Camaro

[coolwelder62]

I would like to sell my latest Camaro project.It started out as a almost rust free shell.It has 1 of my sub frame's.That uses GM C-6 corvette componets.Ride SA coil over's,splined sway bar.DSE rack & pinion,Wilwood W6A brakes(frt.) W4A brakes(rear).2006 GTO LS2&T56,Speartech wiring,Forgeline ZX3's 18x11's frt.18x12's rear.BFG's 295/30/18frt.335/30/18's rear,moser 9" housing,31spline axles'strange 3:73 posi,My 4-link w/Johnny joint's & poly bushed ends,ridetech SA coil over,Rick stainless EFI fuel tank,C&R alun.Rad w/ZO6 ele. fans,Vintage A/C,Scat seat's,impact harness's,DSE minitubs,wiper motor,body bushings,rol cage,Custom Lower Dash panel,RingBros hinge's,All glass is brand new.The Orange paint is the same color as DSE built DaleJr.72 Camaro.At the 2011 RTTh's W/Kevin driving the car it was 7th fastest out of 83 car's.It drive's very nice now that I upgraded to the RideTech coil over's.It has a few small paint chip's in it now we have been driving it.But I can have those fix if needed.Looking For 75K.Please PM me or Email,Or call the shop 1-785-594-7481,or eves.1-785-594-3299.Thank's Scott Mock. https://lateral-g.net/forums/showthread.php4?t=28883

[camcojb]

great car Scott. Good luck with the sale.

[tones2SS]

That is a really nice car. I wish I had the cash.
GLWS

[coolwelder62]

Thank's Jody.

[coolwelder62]

I also have a brand new set of OER split bumpers that I could install if someone like that look better.I might look at trades that involve a ZO6 corvette.Thanks Scott.

[LSXIDOC]

Very Nice!!

[GregWeld]

Does it have a motor and transmission in it?

See you left that out of the "Ad".....

[HRBS]

Originally Posted by coolwelder62

I would like to sell my latest Camaro project.It started out as a almost rust free shell.It has 1 of my sub frame's.That uses GM C-6 corvette componets.Ride SA coil over's,splined sway bar.DSE rack & pinion,Wilwood W6A brakes(frt.) W4A brakes(rear).2006 GTO LS2&T56,Speartech wiring,Forgeline ZX3's 18x11's frt.18x12's rear.BFG's 295/30/18frt.335/30/18's rear,moser 9" housing,31spline axles'strange 3:73 posi,My 4-link w/Johnny joint's & poly bushed ends,ridetech SA coil over,Rick stainless EFI fuel tank,C&R alun.Rad w/ZO6 ele. fans,Vintage A/C,Scat seat's,impact harness's,DSE minitubs,wiper motor,body bushings,rol cage,Custom Lower Dash panel,RingBros hinge's,All glass is brand new.The Orange paint is the same color as DSE built DaleJr.72 Camaro.At the 2011 RTTh's W/Kevin driving the car it was 7th fastest out of 83 car's.It drive's very nice now that I upgraded to the RideTech coil over's.It has a few small paint chip's in it now we have been driving it.But I can have those fix if needed.Looking For 75K.Please PM me or Email,Or call the shop 1-785-594-7481,or eves.1-785-594-3299.Thank's Scott Mock. https://lateral-g.net/forums/showthread.php4?t=28883

Originally Posted by GregWeld

Does it have a motor and transmission in it?

See you left that out of the "Ad".....

Greg..... aging eyes are a bitch ! LOL
Scott.... nice car... good luck with the sale !

[syborg tt]

Okay here is my crack at the add just for you Greg,

1972 Camaro
You won't find a nicer car for the money. Built by Chubby's Fabrication and proven on the street and track.












Build Pictures
http://garagescene.net/gallery3/inde...tion/72-Camaro

Build Thread
https://lateral-g.net/forums/showthread.php4?t=28883


Paint & Body
Project started with an near rust free shell.
Paint Color is the smae Orange Dale Jr. 72 Camaro
DSE Minitubs
DSE Wiper Motor
DSE Body Bushings
Ring Brother Hinges
All glass is brand new.

Engine & Trans
2006 GTO LS2
T56 Manual Transmission

Engine Management
Speartech wiring

Fuel Delivery
Rick stainless EFI fuel tank
Fuel Fill on Drivers Side Rear Quarter ( for looks only )


Cooling
C&R Aluminum Radiator with / ZO6 Eletric Fans

Front Subframe
Scott Mock built Rectangular SubFrame
GM C-6 corvette componets.
RideTech Single Adjust abley Coil Overs
Spline Sway Bar.
DSE rack & pinion,
Wilwood W6A brakes(frt.) W4A brakes(rear).

Rear Suspension
Scott Mock 4-link w/Johnny joint's & poly bushed ends
RideTech Single Adjustable Coil over
Moser 9" housing
31spline axles'
Strange 3:73 posi,


Wheels & Tires
Forgeline ZX3's
Front: 18x11's with BFG's KDW2 Size: 295 30 18
Rear: 18x12's with BFG KDW2 Size: 335 30 18

Interior:
Vintage Air A/C
Scat seat's
Impact Harness's
Custom Lower Dash panel similare Dale Jr's Car
DSE Roll Cage

Subframe Build Pictures
http://garagescene.net/gallery3/inde...ce-Fabrication




Accomplishments

At the 2011 Run through the Hills with Kevin driving the car ( oh ya Kevin's a really really good driver ) it was 7th fastest out of 83 car's. It drive's very nice now that I upgraded to the RideTech coil over's. It has a few small paint chip's in it now we have been driving it. But I can have those fix if needed.

Price: 75K.
Please PM me or Email,
Phone:
Day 785-594-7481
Evening: 785-594-3299.

Thank's Scott Mock.



4-Sale add updated by Marty for Greg since I know he want's to add this car into his collection. I will also pay for a set of cheater glasses if he needs them.

[coolwelder62]

Marty,how much is the bill for awesome wright up. Thank's Bud.After seeing your Wright up I think I priced the car way to cheap.