...

Go Back   Lateral-g Forums > Technical Discussions > Transmission and Rear End
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 07-09-2017, 03:18 PM
Macbuick's Avatar
Macbuick Macbuick is offline
Senior Member
 
Join Date: Jun 2005
Location: Near Bruxelles in Belgium
Posts: 149
Thanks: 0
Thanked 0 Times in 0 Posts
Default 2004r

Hello,

I have installed a 2004R in my 72 Skylark, the gearbox comes from Extreme Automatics and the TV cable is an EZ TV Cable from Bowtie Overdrives.

As explained in both instructions, I replaced the TV spring from the gearbox with the one included in the Bowtie kit.

Everything is in place but I 'm afraid to go further and damage the gearbox....

I don't know how to tune the idle TV position...(ExtremeAutomatics gives an ideal length of 0.840 but with their own spring, not the one from Bowtie ).
I don't know either why it's needed to replace the TV springs...I don't understand why you must replace the TV sping when you change the TV Cable !?


I have another issue with the oil lines going from the gearbox to the radiator, I read that the 2004R has inverted ports compared to the TH350, does it is critical to use the same position as the TH 350 or must I invert the position ?


Thanks for your help

regards

David
__________________
[SIGPIC][/SIGPIC]
72 Skylark & 68 Pontiac Catalina+ 71 El Camino
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:56 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net