Item Location (City/State):
Covina, CA
Price:
$40 - $650
Description:
I am selling off most of my C6 front suspension stuff, going a different route because of the issues I have found with my frame. This would make a great setup if someone is buying a bare c6 front frame and need the components for it.
The GMR C6 front hubs. Includes brake rotor adapters, 8 on 7", for The Brake Man (TBM Brakes) 13" rotors or others and includes the socket to replace and repack the bearings. They have 1/2" studs set up on a 5 on 4.75" bolt pattern. Rotor adapters are still available for Wilwood and Baer brakes. $650 obo.
20170722_173233 by
Jonathan Feltis, on Flickr
C6 Corvette uprights, new just mocked up on car. The steering arms have been cut off.
SOLD
20170722_174309 by
Jonathan Feltis, on Flickr
AGR performance power steering rack. Part#712581, Never used, just mocked up. Slight surface rust on some of the hardlines as seen in the pictures. includes tie rod ends.
SOLD
20170722_180526 by
Jonathan Feltis, on Flickr
Speedway Engineering 3 piece sway bar 1-1/4" x 32", with steel arms, bushings and hardware.
SOLD
20170722_183644 by
Jonathan Feltis, on Flickr
Chassis Works shock mounts. $45 obo.
20170722_192450 by
Jonathan Feltis, on Flickr
Aurora rod ends, 3/4" x 3/4". There are 5 AM12T right hand and 5 AB12T left hand. Teflon lined. $40 Ea obo
20170722_184538 by
Jonathan Feltis, on Flickr
ARP wheel studs, Part #ARP-100-7705, 2 packs of 5. $10 Ea.
20170722_181857 by
Jonathan Feltis, on Flickr
Thanks,
Jon