2nd Chance Camaro - Let the Project Begin

[89 RS]

Originally Posted by syborg tt

I love having tools that have been past down as I feel the people that gave them to me are with me when I am in the garage.



It's a 14" wheel which fits me perfectly when I am sitting in the car.

https://screamingchicken.com/1970-81...ing-wheel-kit/

Best part is they are a site sponsor.

I agree 100% on feeling like the ones who passed down the tools are with me when working in my garage.

Good deal on the steering wheel.


Sent from my iPhone using Tapatalk

[fleetus macmullitz]

MJ,

Obviously you’re very busy, but how about an update?

[syborg tt]

So things have been crazy at work and at life. I finally got out to the garage and decided to make sure the brakes were lubed and ready to go.



Wheels coming off









I really like the new tires



I need to get the front end up and wow did the car settle a little bit.





What ever works





I am happy that I went with the Kore3 brakes from Tobin.





Sooner or later I will put the center caps back on.



Drivers Side is complete



Might as well grease the Upper Ball Joints !!!



Back together

[syborg tt]

So, I ordered a couple fittings for the intake tube and this came in the mail.

Holy crap it looks like an E D Package !!!!







Honestly, I saved the packaging and showed it to my wife so she would know what the heck it was just in case she saw it in the garbage.



I also received the parts I needed to work on the bike for the side of the car.



I found a really old 10 Speed Cassette that needed a serious cleaning.



Cleaned up

[syborg tt]

So I thought I was going to work on the interior and well





However, I decided to move the set back plates under the carpet.









Quick trip to Home Depot



Well, thankfully I starting doing a nut and bolt check and I found that I forgot to install the nuts on the Vintage Air bracket.







Going back to the set back plates.













Cleaning Up the wire looms

[syborg tt]

It has been a crazy couple weeks and I have not had a free moment to work on the car.

Finally, Yesterday I decided to go out to the garage !!!

First up trim the carpet on the Drivers Side.



Choppy Choppy



Test fitting the Kick Panel

[syborg tt]

My plan is to ride today so I decided to make a Taco Run as I new I wanted to Ride today.





Never, did I think this was going to be a big job. I figured it would take a few minutes. Boy was I wrong and thank God the seats were not in the car.

First one is in and it will be feeding the center of the lower dash.



Well, this sucks and I can't find a Band-Aid !!!



Electrical tape to the rescue.



Routing the duct work up to the underside of the dash. I used yellow zip tie's so I can seem them if I ever have to cut them.



The Mag Daddy Magnet mounts worked great under the dash.











Once, I drive the car around a little bit I will most likely install the lower dash that Kenny build.

However, I plan to paint it wrinkle black.



Instead of cleaning up my mess I decided to take Remy for a walk.

[fleetus macmullitz]

Nice update MJ…way to keep at it.