C6 Pedal 25835421

[nicks67ca]

I'm curious to see if there is a need for a pedal stop on the GM 25835421 corvette pedal. I'm using the PSI harness with an LSA which requires the use the this pedal (67 Camaro application). It looks like there are some built in stops on the pedal it self but based on the alignment to the clutch and brake it will need to sit away from the firewall some. I plan on using a modified ironworks bracket to create a secure and flat mounting platform.

Also the pedal seams to have very little overall travel is this common in DBW set ups?

thanks Nick

[andrewb70]

All Gen IV pedals that I have seen have built in stops. As for travel, I've never had issues modulating the pedal.

Andrew

[nicks67ca]

Thanks Andrew. That's what I thought just like the extra confirmation.

[Bmf5150]

Look at the very end of my build post,I built my own bracket .i may still have template ..

http://ls1tech.com/forums/conversion...-upgrades.html

[Jay Hilliard]

DSE sells a bracket that may work.

[nicks67ca]

Thanks Jay I saw that. For $35 its a drop in the bucket at this point.