Tunnel time!
I did not have a motor at this point in the build but I had a buddy that had a broken ls3 block. This saved me a considerable amount of time. I bought a QuickTime ls to mopar housing because the viper transmission has a different spline and length than the t56 for the F body's. It's rated at 550 ft-lbs vs the gm equivalent 450ft-lbs
Original floor and man it was perfect!
By the time I trimmed a little there and a little here the whole tunnel is gone. I set the drive line angle to about 2.5 degrees+\-. I had to cut up the tci trans mount and modify it to my specs. The drive line angle looks perfect under the car.......hope it's vibration free!