Item Location (City/State): Lemont, IL
Price: $16,900
Mileage: 31,500
Description: Showroom clean and low mileage versions of the 4th Generation Camaro are becoming hard to come by as these cars continue to get older. This 2000 Camaro Z28 was originally built on November 22, 1999 at the GM Sainte Therese, Quebec assembly plant. From my understanding the car was delivered to the Old Orchard Chevrolet dealership in Skokie, IL.
This particular Camaro still smells brand new and has always been garage kept under my ownership. Nearly 6 months out of the year it is in storage for the winter months. Typically only driven to car shows/cruise nights and was recently on the 2014 and 2015 HotRod Power Tour. During the HRPT I was averaging 21-25 MPG with 2.73 gears. On a DynoJet the car put down 303hp/304tq to the rear wheels. At a conservative 15% drive-train loss that is 350hp at the flywheel.
The styling and modifications that have been done to this Camaro were inspired by the special edition 4th generation Camaro’s built by Matt Murphy's GMMG, Inc. in conjunction with Chevrolet. Vehicle upgrades and detailed photos listed below.
Also wanted to mention that the plugs, wires, tires, and some other maintenance items have under 2,000 miles on them. You can call or text me at
630-537-0704 and I will get back to you as soon as I can. Or private message me or reply to this thread. If the car doesn't sell soon it will be soon sold through a classic car dealership.
Full Photo Gallery - Click Here
Engine/Fuel/Cooling- SLP Air-Lid w/ S&B Air Filter
- Patriot .650" Lift Dual Spring Kit
- Comp Cams Hi-Tech Chromemoly Pushrods 7.400
- MSD Ignition Wires
- NGK TR-55 Spark Plugs
- Pacesetter LT Headers & Off-Road Y-pipe (No catalytic converters)
- Magnaflow Bullet Muffler (before primary muffler)
- Magnaflow Catback Exhaust
- Racetronix Fuel Pump w/ Hot-Wire Kit
- Hypertech 160 Degree Thermostat
- Dyno Tuning done by Finish Line Performance
Drivetrain- Finish Line Transmission 4L65E Extreme Duty (level 5)
- Precision Industries VigilanteTorque Converter 3200-3400 Stall
- B&M Supercooler (19,000 GVW)
Suspension/Brakes- Strano Springs (550/150 rate)
- Koni Single Adjustable Shocks (4/4)
- Hotchkis Strut Tower Brace
- BMR Adjustable Panhard Rod
- BMR Relocation Brackets
- LG Aluminum Tubular Lower Control Arms
- UMI Tubular Subframe Connectors (2 pt.)
- iRotors Drilled and Slotted Performance Rotors (Zinc Plated)
Wheels/Tires- Billet Specialties Street Lites (17x9.5 & 17x11)
- Matte Black Powdercoated Centers
- Nitto NT05 (275/40/17 & 315/35/17)
Exterior/Interior- SLP Camaro SS Hood (Original Equipment)
- Wings West SS Spoiler
- GMMG Style Tail Panel w/ Stainless Steel "Camaro" Fill-ins
- GMMG Style Billet Grille
- Pacific Clear Corners (Front & Side)
- Window Tint (Rear 5%)
- Leather Seats (Custom Black w/ Gray)
- Custom Painted Interior
- US Speed Embroidered Z28 floor mats
- SLP Car Cover
Electronics/Stereo- Alpine 7894 Head Unit
- Kicker KS Component Speakers
- Kicker CompVR Subwoofer (10 inch)
- Kicker KX 700.5 Amplifier
- Autometer Electric Water Temp Gauge (2635)
- Autometer Electric Trans Temp Gauge (2640)