ok i will start from the beggining.
the car went into a body shop and sat even on both driver and passenger sides. the car went through a lot of restoration, and all the panels were removed, repaired, repainted, etc.. when the panels were placed BACK onto the car, the car appeared to lean very very noticably to the driver side. after checking with many very helpful individuals on this site, as well as through checking myself, we detemined that the most possible cause to this would be a tweaked subframe, and originally missaligned body panels which hid the problem... i have cross measured the frame a few times, and both times have found that the sub-frame is uneven.
so my question then is, has anyone had their car's sub-frame straightened on a frame machine, is that a good route to take, and if i do do that, will my body panels need to be realigned.
hope thats better. thanks.