Well hello all I figured I would give a update to what is going on currently at our shop located in Livermore,ca. Currently we have a multitude of things going on let's start with everyone's favorite: a 1969 camaro we are currently building using a complete speed tech front and rear suspension, a boat load of panel replacement, hand built fuel lines and exhaust system, etc
The next is our a 69 charger with a Schwartz chassis, boat load of panel replacement, mini tub, EFI and a possible R5 dodge circle track motor.
This project is evolving so we will have more updates on that one.
The next car is the 1965 gto project named Deja Vu, this car has evolved a lot from its original interpretation. The car is slatted to debut at sema and be raced eventually at the silver state classic. car is currently sitting back on the frame, we ended up being able to keep the trunk floor stock appearing but we narrowed the floor a total of 10 inches for the Mini tub. The wheel houses have been widened 5 inches per side. The list is still heavy for he amount of fabrication needing to still go into the car to even get it rolling but we are on the right track. Next is the fire system venting, belly pans, air effects and cage install, at that point it will begin to look like car.