I was having issues with my fuel tank system - and wanted to make dropping the fuel tank easier.
I decided to drop the transaxle out of the car - and with that gone - I was able to not only fix the fuel system - but I also decided to upgrade the clutch while I was in there.
The stock LS2 clutch only had 50k miles on it - but I decided to upgrade to the LS7 clutch while it was apart.
With the car torn apart - I also replaced the throwout bearing/slave cylinder, and installed a Tick Performance Speed Bleeder while I was in there.
I finally got the Mickey Thompson Drag Radials installed on the C6 Z06 front wheel.
I test fit the wheels - and the clear both the SS and the Corvette with no major issue.
The 305's stick out of the back of the SS a good bit - but they fit under the Corvette with no issue.
The 305 is a bit large for the SS and a bit undersized for the Corvette - but this was the comprise that I have to deal with to fit on set of drag wheels/tires on 2 cars.
Parts Used:
Mickey Thompson 305 35 18 - http://amzn.to/2ufcit1
C6 Z06 Front Wheels 18x9.5
I took the Corvette out onto the Road course/Roval at Charlotte Motor Speedway!
This was a charity event supporting the Speedway Childrens Charity - and they had the road course open. For $25 - you got 3 laps around the road course.
For the first section - I drove my Corvette.
For the second session - I rode along in my friends SS.