3 Point seat belt upper mount - Lateral-g Forums

renegade6 · #1 09-14-2014, 07:54 PM

I need some ideas on where to mount the upper portion for my three point seat belts. I am thinking along the B pillar (#2 in picture) but, it isn't as well reinforced as newer cars the same issue goes for #1; it's not reinforced very well. I could put it on the lower point (#3) and it would be much easier to reinforce but, I'm a little concerned that it would be too low. I'm open for suggestions.

Thanks

ADiCarlo · #2 09-14-2014, 08:11 PM

Is this for daily use or track use?

By the position of the number I assume it's for the front seat. Do you have a design in mind?

**Sieg** · #3 09-14-2014, 08:13 PM

My two cents.....
You might also go to the Schroth website and check their technical page on mounting. It may give you some ideas.

renegade6 · #4 09-14-2014, 08:44 PM

Mostly daily use with some track time. I have some ideas for building the reinforcement plate, just need to pin down the location for it.

I have thought about putting a harness bar in it and running Corbeau retractable harness belts.

Quote:

Originally Posted by ADiCarlo

Is this for daily use or track use?

By the position of the number I assume it's for the front seat. Do you have a design in mind?