Project: Resale Red
As delivered:
1967 Camaro (V8 Base)
Engine: LS1
Trans: 4L60E
Rearend: 10 bolt
Exterior Color: Resale Red Special
Interior Color: Nantucket Blue
Suspension: Factory
Brakes: Disc
Plans:
Engine: Rebuilt LS1 (short term)
Trans: Century HD 4L60E with 3000 stall
Rearend: 12 bolt
Exterior color: Cyber Gray
Interior color: Cyber Gray/Black
Suspension: CPP Upper and Lower Control arms, QA1 coilovers, CPP Spindles with C5 Hubs, Hotchkis multi-leafs (-1.5 drop) in the rear
Brakes: CPP C5 Brake conversion F/R
Teardown is finally complete on the car. It’s headed to the body shop to begin repairing all the body panels, prep, and paint. The drip rails will be shaved and the seam between the rear quarters and the filler panel will be welded for a nice clean look.
Im using the factory subframe. I sent it off to Precision Powdercoat in Houston and they gave it a nice satin black finish. I highly recommend these guys for powdercoat work.
Before:
After:
My son and I built a body cart, and it was a nice father/son project. Little over $100 invested and it works like a charm.
Here are some teardown pics:
Buddy cutting out the glass
I’ll add pics as I go.