Quote:
Originally Posted by WSSix
Any more progress, Mike?
|
9 months later and there is finally more progress. I kinda called the car done before, but that never really happens.
Last I left off I wanted quieter exhaust and hydraulic lifters.
Last months project.
It's just a cheap pypes stainless catback that I fancied up with some tig welding and a couple v-bands. It so quite you really only hear valvetrain noise now.
https://www.youtube.com/watch?v=eCVxdjQuqbQ
Well that's just entirely to much noise for an 800 hp v6. So:
Lots going on in there right now. I'm swapping solid roller lifters and springs for hydraulic stuff. That allows me to put a timing chain back on it and a stock timing cover and water pump. It had a belt drive with belt driven oil and an electric water pump. Not exactly inspiring on a long drive. This also free's up some heater hose connections and some space for some a/c hoses.
That's the next project. I'm cutting the front half of the cage out of the car, going from a 10 point to a 4 point roll bar. I'm also putting stock seatbelts back in it. 5 point harnesses suck. Then with the cage modified, I can get the dash out and get that a/c in there.
And somewhere in there I fixed up all the holes in the trunk and put some carpet back in it.