Quote:
Originally Posted by 68CamaroYu
How do you remove all this stuff from a 68 Camaro without taking a grinder and cutting it in half? I don't have the key to the ignition so I can't move the ignition to the accessory position and take a paper clip in the back and remove it. Any recommendations?
|
if you don't have the key you'll have to cut the lock cylinder out. I wouldn't use a slide hammer as it may damage your dash.
The head lamp switch has a spring loaded button on one face of the switch itself. push it in pull your head lamp knob,release the button and the knob should come out. Then you can use the sockets. I've use needle nose pliers in the past.