Frostbite - 1967 Firebird

[EBmotorsports]

Hey ya'll,

Been working on the wiring this week. Wanted to share some more pictures with you.

Since we used the 2010 Camaro console, we ended up using the 2010 Camaro parking brake as well that integrates nicely with the console.




We decided to go with the II Much vents. You can see the underside here.



Here's a view of the II Much vents from inside the trunk.



Put a healthy dose of Dynamat everywhere to reduce all the road noise.



I put all of the wiring behind the passenger seat. This project will not have any rear seats, but instead will have a pair of storage containers in the rear. This way you can service the wiring easily from inside one of the storage containers.

We're using the American Autowire harness and Dakota Digital headlight and radiator fan control units. Also mounted the power locks, push button start, and RFID units back here as well.





We're using the Optima batteries and made a custom CNC bracket to hold it in place in the trunk. Very clean clamp system to hold it on the base instead of holding it from the top.



Just starting to wire up some things inside the dash as well.




You can see how the new, modern dash came out once I painted it. It will flow very nicely with the 2010 Camaro console.

[rickpaw]

Wow, it's looking great.

[dhutton]

Are you doing all this work by yourself or do you have help? The pace of this build is incredible and the quality seems great too.

Don

[EBmotorsports]

its me and my son-in-law for the most part, i have one part time guy that gets a few hours a week. We normally work on two at a time but for the last few months we have been on this car only. Thanks for all the compliments also.

[cwylie]

What is that shift boot off of?

[EBmotorsports]

Originally Posted by cwylie

What is that shift boot off of?

It's just a generic Camaro/Firebird lower boot for a T56 transmission. We're putting leather on top of it to trim it out nicely in the console.

[EBmotorsports]

Hey ya'll,

Got some more great updates for you. Getting more and more of the wiring done and starting on the assembly as well.

[EBmotorsports]

Here is a couple more pictures for you all.

[Sieg]

Nice job Eugene!

[EBmotorsports]

Right now I'm just working through all of the car stereo. We have an entire Alpine system that's going in.

• Alpine INE-W940
• Alpine 432 amp
• Two Alpine PDXM12 amps
• Alpine 6x9 speakers
• Alpine SWX-1043D subs
• Alpine Rear View Camera

Should be awesome when it's all put together.