Baer Brake bracket on ridetech spindle

[paulk68]

Originally Posted by SlowProgress

There is almost no runout on the brake rotor so miss is as good as a mile but let me measure and snap a photo of mine tonight.

Thanks for all the help!!

[SlowProgress]

Here is a photo of mine with some feeler gauges. I just snugged up a couple lugnuts.



Ended up being around .102

[paulk68]

Originally Posted by SlowProgress

Here is a photo of mine with some feeler gauges. I just snugged up a couple lugnuts.



Ended up being around .102

thanks, looks like you had to add a few spacers as well to get the bracket where it needed to be. are you about the same distance on the font side of the caliper? Baer is sending me some bigger spacers and also some longer bracket mounting bolts to make sure i have a good connection. It is so nice having someone else using that same parts!!!

[SlowProgress]

I live in the Phoenix area and I did go by Baer one day and picked up a couple of spare shims packs because I could not mix and match to get the centering where I wanted it. I think I ended up centered within a few thousandths, both top and bottom. The first one was slow but it got quicker with practice.

Scott