Quote:
Originally Posted by Che70velle
I had the exact issue with my PTFE hose. I simply took it back apart, cut an inch off of it, and put it back together, with no leaks the second go around.
For the record, I've been building hose assembly's for 20 plus years, and this is the first leaking hose I've ever assembled...
|
Thanks Scot for the input. Is there a rule of thumb how much to cut from the braided steel to avoid getting between the threads?
Should there be a minimum clearance between the socket hex and collar or it does not matter?
The problem if I cut an inch or so again from each end I will run out of the required length and it will become shorter espceially for the return line.