...

Go Back   Lateral-g Forums > Technical Discussions > Engine
User Name
Password



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 04-04-2005, 10:41 PM
Gmac454's Avatar
Gmac454 Gmac454 is offline
Junior Member
 
Join Date: Dec 2004
Location: Minnesota
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
Unhappy Small Block chevy PCV problems

I have a 350 4bolt .30 over (355) all the standard stuff, 2.02 heads, rollers
10.4 - 1 comp. edelbrock airgap intake, etc... it runs perfect and i only have about 50 miles on it. still trying to break it in. my problem is that i blow oil out of the pcv valve hole and out of the front seal on the timing cover. what can i do to stop this? i have put a larger pcv valve on it and a new larger breather on the passenger valve cover. still when i start driving it i start dripping out of the timing cover harmonic balancer seal. and down the sides of the valve covers from the rubber grommets for the pcv and breather.

Thanks
Gmac454
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:10 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net