Quote:
Originally Posted by waynieZ
Sure thanks, any help would be great.
|
There is a kit from Eastwood that I believe is about $90. It has everything you'll need to do this. I believe it even has a CD on how to do lead work.
As I stated before, just make sure everything is as clean as possible. I used a small propane torch to do the work on my doors. (I had a big gap to fill with welding rods then leaded in all in.) I used the propane torch only because I don't have a big torch. You will not have to get the panels very hot, but pretty warm. Take a look at the Eastwood stuff, like I said, everything you'll need. I would opt to get more than 2 lbs of lead though you will go through that pretty fast. When you get ready to start give me a shout and I'll guide you through it.. Good luck.