View Single Post
  #2  
Old 12-02-2010, 08:56 PM
The WidowMaker's Avatar
The WidowMaker The WidowMaker is offline
Senior Member
 
Join Date: Jan 2008
Location: Huntington Beach, Ca
Posts: 773
Thanks: 0
Thanked 0 Times in 0 Posts
Default

i had the 12 bolt narrowed with 9" ends, straightened, blasted, gears assembled and custom axles and bearings made for under 1k from currie. the axles were about 450 by themselves and the gear assembly was 100 so just the narrowing wasnt too bad.
__________________
"The WidowMaker"
70 Chevelle Pro Touring - Garage Built, Backyard Painted
Custom 4 Link & Watts, Rushforth Wheels, Ats Spindles, McLeod RXT Twin Clutch, T56 Magnum, C6Z Calipers & Ring Bros Hinges
Special Thanks To: Rushforth Wheels ; Kore3 ; SC&C
Build Thread : https://lateral-g.net/forums/show...ght=widowmaker

Last edited by The WidowMaker; 12-02-2010 at 09:02 PM.
Reply With Quote