View Single Post
  #8  
Old 03-21-2017, 12:28 PM
ironworks's Avatar
ironworks ironworks is offline
Senior Member
 
Join Date: Oct 2005
Location: Bakersfield, Ca
Posts: 5,149
Thanks: 4
Thanked 30 Times in 19 Posts
Default

Quote:
Originally Posted by DT69Cam View Post
The only problem (if ya can call it that) is many guys including myself have the master and steering column installed already. Also I heard of complaints with the rubber around the column interfering with your plate and as a result the plate is not flush with the firewall. I do not know if the plate was trimmed to avoid this though. Just looking for options here that's all.
Yeah its large and will need to be cut around the column. We always smooth firewall there to get rid of the ugly factory firewall mount for the column.

I would get everything you need mounted in the car, remove it and trace the clearance you need and then trim the pedal bracket to clear whatever set you want. The firewall is not flat there unless you make it flat in the fabrication stage.
__________________
www.ironworksspeedandkustom.com
Reply With Quote