View Single Post
  #2  
Old 02-04-2011, 09:43 PM
aktmracer's Avatar
aktmracer aktmracer is offline
Member
 
Join Date: Mar 2010
Posts: 27
Thanks: 0
Thanked 0 Times in 0 Posts
Default

When i did mine i did not fiil all of the holes. I left some of the larger one's to run lines and wires through. However after the car is completly mocked up, wired and plumbed i may fill what holes were not used. I also left holes in bottum of frame rail so it could drain. Before boxing i applied several coats of cold galvanizing paint then topped it with primer. I figured that would help protect it. Not extremely worried about water since car will not be driven in the rain and with the water hardness I have, not washed with water very often.
__________________
Jeriah

http://s812.photobucket.com/albums/z...67%20Chevelle/

1967 Chevelle LS1/4L60E
1980 FJ40 LT1/TH400 waiting to go in
Reply With Quote