View Single Post
  #7  
Old 03-21-2017, 07:09 AM
DT69Cam DT69Cam is offline
Senior Member
 
Join Date: Jan 2016
Posts: 213
Thanks: 2
Thanked 2 Times in 2 Posts
Default

Quote:
Originally Posted by ironworks View Post
Our bracket is designed aspecifically a good start. It is designed to be trimmed and be a stout bolt in option using the brake master bolts. They are so many variables, from foot size to insulation thickness that it's hard to make a pedel perfect for all.

It's left large to make it cut only bracket as we figure cutting might get easier then welding. Both is 100% bolt in to car. Used it in many cars. Sold a bunch and maybe had one returned on many years.
The only problem (if ya can call it that) is many guys including myself have the master and steering column installed already. Also I heard of complaints with the rubber around the column interfering with your plate and as a result the plate is not flush with the firewall. I do not know if the plate was trimmed to avoid this though. Just looking for options here that's all.
__________________
69 Camaro Convertible (LS3/TKO in the works)
Reply With Quote