View Single Post
  #1130  
Old 06-20-2017, 09:26 PM
syborg tt's Avatar
syborg tt syborg tt is offline
Lateral-g Supporting Member
 
Join Date: Jun 2005
Posts: 8,129
Thanks: 4,568
Thanked 1,546 Times in 850 Posts
Default

Moving on the front suspension.

First step was to clean it and the start taking it apart so I could install the ARP bolts with stainless Nylock nuts.





We also needed to cut the ears out of the spring pockets as there was some interference with the Ride-Tech shocks. While I was in there we sprayed a little Eastwood chassis black rust inhibitors up in the pocket.



There's a good story here but make sure you buy at least two of them if you need to finish a project.



Yes we bought two on the 2nd trip.



That would be Mike cutting and getting metal shavings all over him.



The ARP hardware was supplied in kit form from the guy's at Totally Stainless. Very nice and it helps to keep you organized while your working on the car.



We're all good now. Time to start the assembly.



Bummer steering box bolts area little short.



Moving on.

We had to drill out the sleeves for the ARP Bolts as the 1/2 bolts would not slide through the sleeve.







That silver you see is this nightmare sh!t. Just ask Mike and no Mikey doesn't like that anti-seize at all.




Sent from my iPhone using Tapatalk
__________________
marty-mj
Is a car ever really done???? It's like a ball of yarn unwinding, that has no end... Author DKz Garage

Projects - Syborg TT 4.3l v6 Mini-Truck, 2nd Chance Camaro & SLP575 Bumble Bee - 4Sale

Last edited by syborg tt; 06-22-2017 at 09:01 PM.
Reply With Quote